Private Labelling For Silicone Hose:
Private labelling hose orders are acceptable. Logo drawing or logo sample is required if private labeling is requested. We accept logo drawing in any format, such as .pdf, .jpg, and png. We will print your own logo when producing silicone hoses. Then the hoses show your brand permanently and promoting brand image! Create awareness for your brand!



SUNRISE can emboss part number onto silicone hoses if needed. It's a permanent mark, never falling off or damaged. In general it is recommended that component part numbers be placed in areas that are not visible in the assembly, to avoid confusion to your logo.

Inkjet marking, engraving, machining, laser etching, ink stamping, screen printing and punch stamping are some examples of acceptable part marking methods, depending on the type of part being marked. Part marking shall be permanent and waterproof. Typically, paper labels are not acceptable. Adhesive labels are only permitted on assemblies or parts which cannot be marked by other means, such as very small size hose. Adhesive labels and all other marking methods must be smudge proof, weather proof and able to withstand exposure to high humidity and elevated temperatures (70 deg. C) without becoming illegible.

The popular labelling and marking method is white ink printing using screen printing, pad printing or thermal transfer printing. Contact us now to custom silicone hose from SUNRISE.