banner
How to use snap-on silicone tube? Jun 17, 2021
Silicone Tubing are very common. The production process is: rubber mixing-extrusion-vulcanization-reel (or cutting and packaging). In fact, the production process of snap-on silicone tube and ordinary silicone tube is the same, and it also needs to go through Those processes are only improved on the original silicone tube. The mold is specially made, and the buckle position is designed with a concave-convex groove; ordinary silicone tube is easy to understand that it can be used for insulation protection by putting it on the product. How to install and use this kind of snap-on silicone tube with opening, and what kind of function and effect does it play?


Snap-on Silicone Tube Custom Silicone Tubing


Prepare the materials and necessary tools, and take a piece of snap-on silicone tube. The specification is about 2-4mm larger than the outer diameter of the bare wire of the quilt. It is easy to get stuck when working at high altitudes. If it is too small or too tight, it may not be tight and the time is long. If it is too large, it will fall; but it should not be too large, because it may be swayed by friction and vibration in the high air and it may fall.

First check whether the surface of the bare wire to be wrapped is rusted. After cleaning the surface stains, wipe the rusty area of the bare wire with rubbing paper and alcohol. If it is installed directly at high altitude, it only needs external cleaning to reduce the installation time, Difficulty and risk.
After the wire is cleaned, use a snap-on silicone tube to directly clamp the bare wire, and then evenly apply the special adhesive for the insulating sheath, and then lightly buckle the opening of the buckle, and tie a cable tie about seven or eight meters away. So that this overhead line is fully covered;

Generally, bare wires need to be insulated for many purposes, generally nothing more than the following points:
1. Protect the bare wire itself: In long-term outdoor service, other foreign objects may overlap and cause short-circuit and power outages.
2. Protect peripheral things: such as high-voltage lines passing through crowded areas, roofs of houses, fishing over fish ponds, anti-electricity, passing through tunnels, orchards with barbed wire, etc. All need to install snap-on insulation sleeves to reduce voltage arcs The discharge distance is safe to a certain extent.

SUNRISE support custom silicone tubing, no matter the color, size, length, shape, logo, can be completed. welcome to inquire.


Related Products: Custom Silicone Seals, Extrusion Silicone Seals

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact